ps3 with SUB-20 hub mode

[harbiware]

http://ps3jailbreak.com/?p=305


That is our Atmel
AT90USB646 or 647






If one pin I need
I use only 1
I check first day schematics and what I need see
16Mhz
2*bat54c I don't see this if doesn't have
I can add new addon board


I want ask something ?
Who have PS3 or who want use any hobby pcb or games

[harbiware]

I need only

!!! SUB-20 firmware and bootloader for reconvert back to SUB-20

[xol]

OK,
You could use SUB-20 FW Upload Tool.
And I can compile a FW for you and send you image.

Send me zip file with a FW you want me to compile. Our CPU is AT90USB647.
If some pinout configuration required let me know.

[xol]

Or even better.
If you give me HEX file with FW image you want to upload into SUB-20 send it to me an I will convert it to the format acceptable by SUB-20 FW update tool.

[harbiware]

okey I searching
I found today atmega32