http://ps3jailbreak.com/?p=305
That is our Atmel
AT90USB646 or 647
If one pin I need
I use only 1
I check first day schematics and what I need see
16Mhz
2*bat54c I don't see this if doesn't have
I can add new addon board
I want ask something ?
Who have PS3 or who want use any hobby pcb or games
ps3 with SUB-20 hub mode
Moderator: serg
Re: ps3 with SUB-20 hub mode
I need only
!!! SUB-20 firmware and bootloader for reconvert back to SUB-20
!!! SUB-20 firmware and bootloader for reconvert back to SUB-20
Re: ps3 with SUB-20 hub mode
OK,
You could use SUB-20 FW Upload Tool.
And I can compile a FW for you and send you image.
Send me zip file with a FW you want me to compile. Our CPU is AT90USB647.
If some pinout configuration required let me know.
You could use SUB-20 FW Upload Tool.
And I can compile a FW for you and send you image.
Send me zip file with a FW you want me to compile. Our CPU is AT90USB647.
If some pinout configuration required let me know.
Re: ps3 with SUB-20 hub mode
Or even better.
If you give me HEX file with FW image you want to upload into SUB-20 send it to me an I will convert it to the format acceptable by SUB-20 FW update tool.
If you give me HEX file with FW image you want to upload into SUB-20 send it to me an I will convert it to the format acceptable by SUB-20 FW update tool.
Re: ps3 with SUB-20 hub mode
okey I searching
I found today atmega32
I found today atmega32