XDIMAX Products Forum

http://ps3jailbreak.com/?p=305


That is our Atmel
AT90USB646 or 647






If one pin I need
I use only 1
I check first day schematics and what I need see
16Mhz
2*bat54c I don't see this if doesn't have
I can add new addon board


I want ask something ?
Who have PS3 or who want use any hobby pcb or games

I need only

!!! SUB-20 firmware and bootloader for reconvert back to SUB-20

OK,
You could use SUB-20 FW Upload Tool.
And I can compile a FW for you and send you image.

Send me zip file with a FW you want me to compile. Our CPU is AT90USB647.
If some pinout configuration required let me know.

Or even better.
If you give me HEX file with FW image you want to upload into SUB-20 send it to me an I will convert it to the format acceptable by SUB-20 FW update tool.

okey I searching
I found today atmega32