All,
As well as being the UK direct sales rep for SUB-20 modules, I'm a LabVIEW developer.
I'm sharing these drivers as a work-in-progress. I'd welcome any comments or suggestions.
They currently support all SUB-20 functions (I think) except:
MDIO, Bit-bang I2C, RS232/RS485, FIFO / Slave modes
I hope to add the rest in the next few weeks.
There are several examples included that should allow you to be up and running in a matter of moments.
Please note you will have to install the appropriate software package from XDIMAX first: http://www.xdimax.com/sub20/sub20.html#DLD
The drivers were developped in LabVIEW 2011, but I've down-saved them to 8.5 so people with older versions can use them.
Download from here http://ktizo.co.uk/documents/SUB-20v0.2.zip
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Airmail to most European countries.
http://ktizo.co.uk/SUB-20.php
LabVIEW driver for SUB-20
Moderator: serg
-
- Posts: 11
- Joined: Wed Sep 28, 2011 4:25 pm
Re: LabVIEW driver for SUB-20
Please see this latest update to the SUB-20 LabVIEW driver.
v0.3 includes the following changes:
* Fixed bug in SPI_Config_Set which prevented SPI Slave from being selected
* Added RS232/RS485, and MDIO support
* Changes to file structure
Please note these are beta drivers and are not fully tested.
The drivers were developed in LabVIEW 2011, but I've down-saved them to 8.5 so people with older versions can use them. Download from here http://ktizo.co.uk/documents/SUB-20v0.3.zip
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Airmail to most European countries.
http://ktizo.co.uk/SUB-20.php
v0.3 includes the following changes:
* Fixed bug in SPI_Config_Set which prevented SPI Slave from being selected
* Added RS232/RS485, and MDIO support
* Changes to file structure
Please note these are beta drivers and are not fully tested.
The drivers were developed in LabVIEW 2011, but I've down-saved them to 8.5 so people with older versions can use them. Download from here http://ktizo.co.uk/documents/SUB-20v0.3.zip
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Airmail to most European countries.
http://ktizo.co.uk/SUB-20.php
-
- Posts: 11
- Joined: Wed Sep 28, 2011 4:25 pm
Re: LabVIEW driver for SUB-20
Please see this latest update to the SUB-20 LabVIEW driver.
v0.4 includes the following changes:
* Fixed bug in RS232_timing_set
* Fixed various memory leaks
Please note these are beta drivers and are not fully tested.
The drivers were developed in LabVIEW 2011, but I've down-saved them to 8.0 so people with older versions can use them. Download from here http://ktizo.co.uk/documents/SUB-20v0.4.zip
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Airmail to most European countries.
http://ktizo.co.uk/SUB-20.php
v0.4 includes the following changes:
* Fixed bug in RS232_timing_set
* Fixed various memory leaks
Please note these are beta drivers and are not fully tested.
The drivers were developed in LabVIEW 2011, but I've down-saved them to 8.0 so people with older versions can use them. Download from here http://ktizo.co.uk/documents/SUB-20v0.4.zip
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Airmail to most European countries.
http://ktizo.co.uk/SUB-20.php
-
- Posts: 11
- Joined: Wed Sep 28, 2011 4:25 pm
Re: LabVIEW driver for SUB-20
Latest update to LabVIEW drivers for SUB-20:
v0.5 includes support for MDIO_XFER, including support for CFP fibre-optic modules.
Please note these are beta drivers and are not fully tested. The drivers were developed in LabVIEW 2011, but I've down-saved them to 8.5 so people with older versions can use them. Download from here http://ktizo.co.uk/documents/SUB-20v0.5.zip
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Airmail to most European countries.
http://ktizo.co.uk/SUB-20.php
v0.5 includes support for MDIO_XFER, including support for CFP fibre-optic modules.
Please note these are beta drivers and are not fully tested. The drivers were developed in LabVIEW 2011, but I've down-saved them to 8.5 so people with older versions can use them. Download from here http://ktizo.co.uk/documents/SUB-20v0.5.zip
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Airmail to most European countries.
http://ktizo.co.uk/SUB-20.php
-
- Posts: 11
- Joined: Wed Sep 28, 2011 4:25 pm
Re: LabVIEW driver for SUB-20
Latest update to LabVIEW drivers for SUB-20: Download from here http://ktizo.co.uk/documents/SUB-20v0.7.zip
v0.7 includes the following changes/updates:
* Bug fix in PWM example
* Uses .NET v4 for compatibility with LabVIEW 2012/2013
* Improved error handling
* Improved dll referencing
* Now works with multiple SUB-20's
Please note these are beta drivers and are not fully tested. Suitable for LabVIEW 2012 and above. For earlier version of LabVIEW, use v0.5
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Fast airmail to most European countries.
http://ktizo.co.uk/SUB-20.php
v0.7 includes the following changes/updates:
* Bug fix in PWM example
* Uses .NET v4 for compatibility with LabVIEW 2012/2013
* Improved error handling
* Improved dll referencing
* Now works with multiple SUB-20's
Please note these are beta drivers and are not fully tested. Suitable for LabVIEW 2012 and above. For earlier version of LabVIEW, use v0.5
Looking forward to your comments...
Jon.
PS. We stock most SUB-20 modules and can deliver next-day to UK. Fast airmail to most European countries.
http://ktizo.co.uk/SUB-20.php