RS232 Monitoring

Moderator: serg

Post Reply
xol
Site Admin
Posts: 241
Joined: Sat Aug 29, 2009 8:04 am

RS232 Monitoring

Post by xol »

To monitor half-duplex RS232 communication with SUB-20 (or PC) you can use Monitoring Dongle presented below. Dongle has 3 DB9 connectors. Left and right are pass through connectors and bottom one is a monitor connector. The data passing between pins 2 and 3 of the left and right DB9 connectors in both directions can be viewed at the bottom connector at pin 2.

Schematics
RS232-monitor-sch.jpg
RS232-monitor-sch.jpg (24.35 KiB) Viewed 36717 times
Monitoring Dongle
RS232-monitor.jpg
RS232-monitor.jpg (63.65 KiB) Viewed 36717 times

Post Reply