Difference between revisions of "KNX"
(→KNX module installation and activation) |
(→KNX module installation and activation) |
||
| Line 20: | Line 20: | ||
The trace above corresponds to the activated KNX module. Otherwise special activation string should be provided. To get activation string contact CoolAutomation and specify a serial number of the CoolMasterNet device where KNX module has to be activated. Once activation string is provided by CoolAutomation it should be entered as a regular command. | The trace above corresponds to the activated KNX module. Otherwise special activation string should be provided. To get activation string contact CoolAutomation and specify a serial number of the CoolMasterNet device where KNX module has to be activated. Once activation string is provided by CoolAutomation it should be entered as a regular command. | ||
| + | |||
| + | Now KNX module is ready for operation and can be connected to KNX bus. Mind the polarity - it is essential for KNX bus. | ||
Revision as of 05:45, 18 April 2015
KNX module installation and activation
Physical connection of CoolMasterNet to KNX bus is made with "CoolAutomation KNX extension module", further referenced as KNX module. KNX module can be pre-installed inside CoolMasterNet body by CoolAutomation or can be purchased later and installed by customer itself. Once KNX module is installed it should be activated on line L3. Run line command to check if KNX module is activated.
|
>line |
The trace above corresponds to the activated KNX module. Otherwise special activation string should be provided. To get activation string contact CoolAutomation and specify a serial number of the CoolMasterNet device where KNX module has to be activated. Once activation string is provided by CoolAutomation it should be entered as a regular command.
Now KNX module is ready for operation and can be connected to KNX bus. Mind the polarity - it is essential for KNX bus.
