KNX
From XDIMAX Products Wiki
Revision as of 05:05, 18 April 2015 by Xol (Talk | contribs) (Created page with "Physical connection of CoolMasterNet to KNX bus is made with "CoolAutomation KNX extension module", further referenced as KNX module. KNX module can be pre-installed inside Co...")
Physical connection of CoolMasterNet to KNX bus is made with "CoolAutomation KNX extension module", further referenced as KNX module. KNX module can be pre-installed inside CoolMasterNet body by CoolAutomation or can be purchased later and installed by customer itself. Once KNX module is installed it should be activated on line L3. Run line command to check if KNX module is activated.
