Troubleshooting USB Driver installation problem
From XDIMAX Products Wiki
CoolMasterNet requires USB Driver installed in both Application (regular) and Bootloader modes. If for some reason USB driver was not properly installed, it can be fixed/forced with free Zadig tool.
- Download Zadig executable
- Run Zadig executable (no installation required)
- Choose CoolMasterNET from the device list
- Make sure WinUSB driver is selected
- Click Reinstall WCID Driver
WinUSB Driver for CoolMasterNet will be installed. Now you can use CoolAutomation FW Update Tool. If USB Driver is required for Bootloader mode CoolMasterNet should be in Boot Mode during procedure mentioned above.
