Modbus IP

Modbus IP Server Configuration

CoolMasterNet Modbus IP Server is activated with below command:

>modbus IP enable OK, Boot Required! >

CoolMasterNet has to be restarted to run Modbus IP server for the first time. Same way Modbus IP server can be disabled, in this case instead of enable type disable
To quire current Modbus IP server configuration use modbus command without parameters:

>modbus ModBus IP  : enabled server port  : 502 CG4 ignore  : none OK >

Modbus IP default TCP/IP port is 502. This is the so called well-known Ethernet port. If required port number can be changed with:

>modbus server port 500 OK, Boot Required! >